Торрент cFosSpeed 8.02 build 1972 [2012, RUS]

cFosSpeed 8.02 build 1972 -- 02-Jul-2012

+ Added expand_rwin variables to output of "spd tcb".

+ The WMI provider in cFosSpeed now also supports GetObject/GetObjectAsync,
  so more flexible WMI scripts are possible.

x Fixed a bug in RWIN expansion.  This bug caused prevented connections to
  certain servers.  Thanks to Marcus Rüppel for his help.
  
  This could improve download speed with some servers as well.

x It could have happened that class delays were still set after rx-shaping was
  switched off (you could see that with "spd classes").  That would have
  resulted in unnecessary delays.  Fixed.

x If the un/update-installation fails because the service could not be
  deinstalled, the installed will now return a proper error message asking you
  to reboot and try again.

x Fixed a problem where an update install would sometimes fail, because
  spd.exe could not be deleted.

x Improved error handling if cFosSpeed service could not be deleted on update
  install.

x Hopefully fixed a crash.  Thanks to Bartosz Polański for dump files.

x Small fix for RWIN expansion and added more debug output.  Thanks to
  Marcus Rüppel.

- If you had several IPs set for your network card, cFosSpeed would have used
  them in unspecific order, depending on the ARP requests sent.  Now cFosSpeed
  should always use the primary IP.


cFosSpeed 8.00 build 1946 -- 07-May-2012

! cFosSpeed will now automatically expand Windows' TCP RWIN as needed!
  With our new "Automatic RWIN expansion" cFosSpeed will expand the RWIN (and
  the matching window scaling) to a value that allows a download with full
  speed and a delay of 100 msec.

  This makes system-wide settings of "GlobalMaxTcpWindowSize" or
  "TcpWindowSize" (under XP) superfluous and will keep your downloads fast even
  if Windows 7 "auto-tuning" feature doesn't work for you.

  As an added goodie it will provide fast download even for programs that
  can not achieve full download speed because they provide too small buffers to
  the Windows TCP/IP interface, like Cygwin SCP.

  You can change the maximum delay (i.e. TCP round trip time), but that affects
  memory consumption: cFosSpeed needs (delay in seconds) * (downloadspeed in
  bytes/sec) bytes, i.e. for a DSL line with 25 mbits/s (about 3000 kbytes/s)
  the memory requirement is 0.1 sec * 3000000 bytes/sec = 300 kbytes.  To
  change this time use the "spd gset expand_rwin_dest_time "
  command.

* Added WMI support. cFosSpeed creates a WMI class 'cfosspeed_perf_data'
  in the namespace \root\cfos which has all known skin variables as
  properties (see www.cfos.de/en/skin/skin-reference.htm for details).
  This allows WMI utilities to display the same information as in the
  cFosSpeed status window. There is a little demo of how to access the
  cFosSpeed WMI data: wmi_demo.hta in the cFosSpeed dialog folder.

* To help cFosSpeed work with mobile connections it now dynamically tries ping
  TTL values until someone answers, max with TTL 24.  This should help some
  users, where the first 10 or so hops would not answer.

+ Skin section now have an optional parameter 'print_allowed'. You can set
  it to 0 to disable this section when not rendered as normal window on
  screen.

+ Added Slovenian language.  That makes a total of 33 languages supported.
  Even more languages are downloadable from our web site, here:
  http://www.cfos.de/speed/documentation/lang.htm

+ cFosSpeed now checks every 2 days for program news.  If there are any,
  it displays the mail symbol in the status window and opens a url when
  clicked.  This feature is on by default.  If you are not interested in
  program news, you can turn it off in the context menu under "Options".

x Fixed a bug with negation of -s-iplist, -d-iplist, -r-iplist, -l-iplist
  rules.  Thanks to Oliver Niebur for the report.

x Added work-around for a Windows XP bug which prevented opening of web
  sites.

x Fixed a bug in the XL skins, where Mbytes per seconds were not displayed
  correctly. Thanks to Cody.

x cFosSpeed now installs on Windows 8 Consumer Preview.  Thanks for all
  feedback!

x Fixed a bug which prevented connections to be displayed by the keyboard
  LED script. Thanks to yashpalshah for the report.

x On some machines spd.exe consumed a lot of CPU power and accessed the
  registry heavily.  Fixed.  Thanks to Empyter.

x On some machines the status window is not always displayed after sleep.
  Fixed.

x The on-the-fly prioritization dialog did not allow you to permanently
  prioritise programs, which weren't already permanently prioritised.
  Fixed.

- Integrated keyboard LED support into cFosSpeed.exe. It no longer uses
  the scripting host.

- Program news will not be displayed immediately after first installation.

- Changed COM initialisation.

- Improved setupapi log file support.

- Added memory debugging.

- OEM versions no longer notify the user about updates.


cFosSpeed 7.00 build 1901 -- 8-Nov-2011

* Added manual priorisation for connections, i.e. you can set connections
  to a desired class based on their addresses, l7-protocols or programs.
  Use the "spd prio" (or prioritize or prioritise) command to set the prio
  on the command line:

  Help says:
     prioritise tcp  
     prioritise udp  
     prioritise prot  
     prioritise prog  
  , ,  and  may contain '?' and '*' wildcards.
  examples:
     prioritise tcp 192.168.8.204:52437 194.95.249.23:80 default
     prioritise udp 192.168.8.204:* 208.67.222.222:53 high
     prioritise prot *BULK low
     prioritise prog utorrent.exe lowest

  An upcoming version will have a GUI to set priorities.

* cFosSpeed now has class delay management: this regulates the delay of each
  traffic class (which is user configurable) based on the amount of traffic
  in the class in comparison to other classes.

  Example: if you have a lot of traffic in your 'low' class and your 'high'
  class traffic doesn't get enough bandwidth, cFosSpeed will introduce some
  delay for the 'low' class, so it sends less rapidly and your 'high' class
  streams get some additional performance.

  This should greatly help heavy downloaders like torrent users.

* cFosSpeed will now actively slow down the rx-speed of download streams if
  they are prioritised lower than other streams which run at the same time.
  In other words: if you are watching a video stream in your brower (high
  prio) and downloading at the same time (low prio), cFosSpeed will slow down
  the downloads to make sure you get enough bandwidth for the the video.
  But if the video is stopped, all bandwidth is again available for the
  downloads.

  This can be switched off by "spd gset throttle_fast 0".  Default is on.

  "spd classes" and "spd cons -wquot" et al. show a column named "wquot",
  which is a quotient that shows how fast a stream resp. class is in
  comparision to how fast it should be.  E.g. a quotient of 1.00 means
  perfect, 1.5 means 50% too fast, 0.8 means 20% too slow.

! To comply with the Windows design guides, cFosSpeed now stores all global
  and Traffic Shaping related data in \ProgramData\cFos\cFosSpeed directory.
  All user specific data, like selected language and skins, are stored in
  \Users\\Appdata\Local\cFos\cFosSpeed.

! The -weight class parameter that is specified in the default settings does
  now specify the weight of all rx-streams in a class and no longer the weight
  of a single stream.  This helps to keep fast sending streams of low priority
  (like P2P) slower and higher prio streams faster.  A exacter regulation is
  still in development.

* Added On-the-fly prioritization.  The "current connections" dialog now
  has the option to prioritize a connection, protocol or program temporary
  or easily add it to the prioritization scheme.  Just click on a connection
  to change its priority.  In many cases it will be easier to use this dialog
  than the normal program and protocol prioritization dialogs.  So, for example,
  while you work/play on your computer and notice a certain connection uses
  too much bandwidth, you can click it and reduce its priority without changing
  the general prioritization system.

+ You can now undo the change of priority by using a "spd prio  none"
  command (i.e. by specifying a command with the class name "none").  The class
  is then reset to the value before the setting.

  Only classes that are no longer 'idle' or 'working' can be changed in their
  priority.  Otherwise, they are not in use anyway, since 'idle' or 'working'
  are only set on fresh connections were the priority could not yet been
  determined.

+ Added filter expression -manual.  It's true for packets on connections that
  have been manually changed in their priority.

+ The "spd perf" setting is now automatically saved.

+ Added Indonesian & British English language.  That makes a total of 32
  languages supported.  Even more languages are downloadable from our web site,
  here: http://www.cfos.de/speed/documentation/lang.htm

+ The L7 detector now recognizes Bittorrent uTP.

+ -class rule works now for UDP connections as well.

+ "spd classes" command shows stats for all classes in table form.

+ Added -delay parameter for classes.  With this you can make sure packets in
  that class are sent only after a minimum delay time in the queue.  That is,
  -delay cann add some ADDITIONAL delay for packets.  By default, all delays
  are set to 0, i.e. no additional delays are introduced.

+ Added -class filter expression.  This allows filtering after the class of a
  TCP stream, i.e. you could use the filter "-tx -higher -class lower -c lower"
  to filter out all TCP ACKs of streams that are classified as lower.

+ The program and protocol prioritization dialogs now have a button
  to restore the prioritization settings to their default values.

+ The program prioritization dialog now allows you to suggest a newly added
  program to the cFos team, so we can include it in future releases.

+ Changed the look of the current connections dialog.  It also now has a
  "Freeze" button to stop periodical update of the current connections.

+ Speeded protocol and program prioritization dialogs.  This also
  fixes the bug where IE9 causes page display problems when switching to
  the games section.

+ Skins now support an x- and y- positioning offset. By specifying
  x_ofs=  and   y_ofs=   in the [all] section of the skin .INI you
  can move the skin's default position by  pixels to the right and
   pixels to the bottom. This is useful, if the skins have shadows.

+ Auto-hide on fullscreen now also works after you opened/closed the
  window manually. However, if you turn off auto-open/auto-hide
  Auto-hide on fullscreen is also deactivated.

+ Due to popular demand, we added an option to lock the window position to
  the window settings sub-menu.

+ Added Layer-7 stream detection for VLC and Media Player Classic.

+ From now on, installation archives contain both x86 and x64 flavours of
  cFosSpeed ("fat" archives).  The right Setup is started automatically.
  Furthermore, the archives are packed with LZX, resulting in a higher
  compression ratio.

- Status window auto-arrange is now turned off when you manually move the
  status window.

- Added "spd echo ..." command that just echos the text to the trace file and
  console.

x Fixed the 2 window problem and disabled line calibration / send test pings in
  cfosspeed context menu.

x Fixed several bugs in the Online Budget/Counter dialogs.

x Fixed truncated l7-protocol names in connection overview.

x Fixed a crash.  Thanks to Norbert Paradowski for dump file.

x When you press the freeze button in the current connections dialog and
  then click on one of the sorter tabs, the current connections are still
  refreshed and sorted.

x Fixed a bug where net_talk_bcast would not be saved properly and was lost
  after the next restart.  Thanks to Михаил Монахов for his bug report.

x Fixed bugs in rx-shaping code.

x Fixed a long-standing bug, where the status window would disappear
  after stand-by/wake up.

x Fixed a bug where newer dialog html files would not overwrite the old
  ones during an update installation.

x Fixed a bug that caused the driver not to load sometimes after booting.

x If a ping_dest has been set by the user we accept ping replies ("pongs")
  to any TTL.  Otherwise, only ping replies to TTLs 2-4 are accepted.  Thanks
  to tomtores for inspiration.

x Fixed a rare bluscreen.

x Added check against NULL pointer in Windows 7 mobile broadband driver status
  messages.  Thanks to marmal for bug report and dump file.

---

Соединения:
Широкополосные: Кабель и DSL
Низкоскоростное соединение: Modem и ISDN
Мобильные (UMTS, HSDPA, GSM, GPRS, HSCSD)
Медиа:
DSL, PPPoE
DSL, PPPoA (Vcmux and LLC)
DSL, PPTP
VDSL
Кабель
ISDN
IP over AAL
RFC1483/2684 bridged

Маршрутизация:
Соединения через маршрутизатор и через коммутируемый доступ
LAN и WLAN
Режимы маршрутизатора и моста
VPN
Несколько соединений одновременно
Настраиваемые маршруты
Несколько IP адресов на один сетевой адаптер

Приоритезация трафика (Traffic Shaping):
Многопользовательская версия
TX and RX приоритезация
Анализ протокола L7
Приоритезация программ
Обнаружение RTP/VoIP
5 очередей приоритетов
Персональные правила с языком фильтрации

Настройки:
Режим низкого времени ожидания
Авто-MTU оптимизация

Дополнения:
Ресурсы (Budgets) Онлайн
График использования
Обзор соединений
Скины
Межсетевой экран (Firewall)
Журналирование данных и пакетов
32-Bit и 64-Bit версия
12+ языков

---